Liquid Polish Paint (Venetian Plaster)

This image is our visualisation: it shows the material and the shade, not a photographed project; the squares in the shade picker are real factory samples.

Interior coatings · A06

Liquid Polish Paint (Venetian Plaster)

Model CR-613 25 kg pack

The look of smooth architectural concrete. Stated service life of the coating is more than 20 years.

Shade19G0319B Full palette
$12per m² · approximate*
System make-up, price per m²
  • Primer$2
  • Liquid Polish Paint middle coat$3
  • Liquid Polish Paint$7
  • System per m²$12

* The price per m² is approximate: every material is calculated for the project, depending on the surface it goes onto (paint, cement and so on).

For 10 m²: $120
Where it is usedSports complexes, hospitals, railway stations, schools, park structures and office buildings, inside and out.
  • Slows the degradation of cement walls caused by ultraviolet light and acid rain.
  • An elastic penetrating waterproofing primer, together with the topcoat, prevents rain staining, weathering of the facade and loss of concrete strength.
  • Protects the reinforcement inside the structure against corrosion by chloride and carbonate ions.
  • Evens out colour variation and defects in the concrete while keeping its natural texture.

Liquid Polish Paint is a new-generation material that delivers the same restrained, natural, high-end effect as fair-faced concrete, while being faster and less costly to apply.

BrandVISSNEY
Item code / modelCR-613
SeriesInterior coatings
Pack size25 kg per bucket
Coveragearound 0.7 kg/m²
Coat thickness1 mm per coat
Drying timeabout 4 hours
ApplicationInterior walls, Facade, Ceilings
EffectConcrete look, Smooth
PropertiesMoisture-resistant, UV-resistant, Washable
Shades in palette4
ManufacturerFoshan Shunde Chaoran Building Materials Industry Co., Ltd.

System layers

LayerCoatsPrice per m²
Primer1$2
Liquid Polish Paint middle coat1$3
Liquid Polish Paint2$7
Total per m²$12

Application steps

  1. Prime the levelled substrate
  2. Apply the basecoat in a single pass
  3. Once dry, apply a full coat of the main material
  4. Apply the main material in patches over two passes
  5. Sand and polish

Sequence taken from the manufacturer's technical data sheet. Level, dust off and dry the substrate before you start.

19G0319B#9C9C9C
21G0322P#857F7B
21G0322J#A49997
21G0322H#627584

Come to the showroom and see the shades in person — on screen the colour is only approximate. Any colour can be made to order, except for ranges that come in factory shades only.

All terms

The properties and figures on this page come from the VISSNEY catalogue and are stated by the manufacturer; we have not tested them ourselves.

Similar materials

Full series
Microcement Paint for wall
Interior · CR-613 Microcement Paint for wall

Silicate cement with mineral pigments: a seamless, non-combustible coating for bathrooms and pools.

$14per m² · approx.
Nalan Starry Glitter Paint
Interior · CR-NL707 Nalan Starry Glitter Paint

An eco-friendly art coating with coloured flecks and a soft suede sheen. Spray-applied.

$12per m² · approx.
Eggshell Wall Paint 3.0
Interior · CR-FG708 Eggshell Wall Paint 3.0

A dense, silky paint: washes clean without marks, holds its colour and suits damp rooms.

$7per m² · approx.