Archi+ Pietra Intonaco

This image is our visualisation: it shows the material and the shade, not a photographed project; the squares in the shade picker are real factory samples.

Interior coatings · A01

Archi+ Pietra Intonaco

Model 24G1209

Mineral plaster of milled natural stone in coarse and fine grades; bridges hairline cracks.

Shade24G1209H Full palette
$17per m² · approximate*
System make-up, price per m²
  • Primer$2
  • Archi+ Pietra Intonaco paint$13
  • Topcoat$2
  • System per m²$17

* The price per m² is approximate: every material is calculated for the project, depending on the surface it goes onto (paint, cement and so on).

For 10 m²: $170
Where it is usedWalls and feature panels in living rooms, dining rooms, office buildings and commercial interiors.
  • Highly workable: texture and finish are changed through application technique and choice of tool, to suit the designer's intent.
  • Durable and hard-wearing: holds its appearance for years under everyday use and cleaning.
  • Bridges hairline cracks in the substrate.
  • Washes with water and does not yellow.

Archi+ Pietra Intonaco is made from natural stone that has been milled and graded into precise particle sizes. The cured coating combines elasticity with high surface hardness, so it stands up to knocks and chipping. The film keeps its colour and does not yellow, resists soiling unusually well and washes down with plain water. Coarse and fine sand grades are available, and both bridge fine cracks in the wall.

BrandVISSNEY
Item code / model24G1209
SeriesInterior coatings
Pack sizeto be confirmed
Coverageto be confirmed
ApplicationInterior walls
EffectTextured
PropertiesWashable, Mould-resistant
Shades in palette3
ManufacturerFoshan Shunde Chaoran Building Materials Industry Co., Ltd.

System layers

LayerCoatsPrice per m²
Primer1$2
Archi+ Pietra Intonaco paint2$13
Topcoat1$2
Total per m²$17

Application steps

  1. Apply one coat of penetrating primer
  2. Apply two coats of tinted basecoat
  3. Trowel on two coats of the main material
  4. Work the surface to the required effect
  5. Sand the surface and remove dust
  6. Apply two coats of topcoat

Sequence taken from the manufacturer's technical data sheet. Level, dust off and dry the substrate before you start.

24G1209H#C5BFAF
24G1209L#D0C9BB
24G1209E#CE8877

Come to the showroom and see the shades in person — on screen the colour is only approximate. Any colour can be made to order, except for ranges that come in factory shades only.

All terms

The properties and figures on this page come from the VISSNEY catalogue and are stated by the manufacturer; we have not tested them ourselves.

Similar materials

Full series
Crystal Diamond Sand Paint
Interior · CR-605N/W Crystal Diamond Sand Paint

Silicone-acrylic emulsion with kiln-fired sand: a European look, trowel-applied with no spraying.

$23per m² · approx.
Nalan Starry Glitter Paint
Interior · CR-NL707 Nalan Starry Glitter Paint

An eco-friendly art coating with coloured flecks and a soft suede sheen. Spray-applied.

$12per m² · approx.
Eggshell Wall Paint 3.0
Interior · CR-FG708 Eggshell Wall Paint 3.0

A dense, silky paint: washes clean without marks, holds its colour and suits damp rooms.

$7per m² · approx.
Air-purifying
Velvet Wall Paint
Interior · YS707 Velvet Wall Paint

Pearl powder, bentonite and cotton. A velvet sheen that shifts with the light, plus negative-ion release.

$15per m² · approx.