Crystal Diamond Sand Paint

This image is our visualisation: it shows the material and the shade, not a photographed project; the squares in the shade picker are real factory samples.

Interior coatings · A02

Crystal Diamond Sand Paint

Model CR-605N/W 25 kg pack

Silicone-acrylic emulsion with kiln-fired sand: a European look, trowel-applied with no spraying.

ShadeCR-DC04 Full palette
$23per m² · approximate*
System make-up, price per m²
  • Primer$2
  • Crystal Diamond Sand Paint$19
  • Topcoat$2
  • System per m²$23

* The price per m² is approximate: every material is calculated for the project, depending on the surface it goes onto (paint, cement and so on).

For 10 m²: $230
Where it is usedPremium building interiors; walls and columns in offices, institutional buildings and commercial projects.
  • A refined finish with a distinctly European character.
  • Combines the strengths of elastomeric coatings and stone-effect finishes.
  • No spraying required, which simplifies work on site.
  • Supplied without added tinting pastes, for a stable and predictable result.

Crystal Diamond is built on a purpose-made silicone-acrylic emulsion, selected kiln-fired sand and performance additives. Once formed, the surface reads as restrained and distinctly European. The product brings together what elastomeric coatings and stone-effect finishes each do well: a high-end appearance that remains straightforward to apply, which matters on premium projects. No spray equipment is needed, and that markedly reduces the complexity of the work on site.

BrandVISSNEY
Item code / modelCR-605N/W
SeriesInterior coatings
Pack size25 kg per bucket
Coveragearound 2.75 kg/m²
Coat thickness1.5–2 mm per coat
Drying timeabout 8 hours
ApplicationInterior walls
EffectTextured, Stone / granite
PropertiesMoisture-resistant, Mould-resistant
Shades in palette2
ManufacturerFoshan Shunde Chaoran Building Materials Industry Co., Ltd.

System layers

LayerCoatsPrice per m²
Primer1$2
Crystal Diamond Sand Paint2$19
Topcoat1$2
Total per m²$23

Application steps

  1. Prime the levelled substrate
  2. Apply the first coat of the main material
  3. Once dry, apply the second coat and level it out
  4. Burnish the surface with the trowel
  5. Apply a gloss topcoat

Sequence taken from the manufacturer's technical data sheet. Level, dust off and dry the substrate before you start.

CR-DC04#E2D8BF
CR-DC08#D1C2A6

Come to the showroom and see the shades in person — on screen the colour is only approximate. Any colour can be made to order, except for ranges that come in factory shades only.

All terms

The properties and figures on this page come from the VISSNEY catalogue and are stated by the manufacturer; we have not tested them ourselves.

Similar materials

Full series
Archi+ Pietra Intonaco
Interior · 24G1209 Archi+ Pietra Intonaco

Mineral plaster of milled natural stone in coarse and fine grades; bridges hairline cracks.

$17per m² · approx.
Nalan Starry Glitter Paint
Interior · CR-NL707 Nalan Starry Glitter Paint

An eco-friendly art coating with coloured flecks and a soft suede sheen. Spray-applied.

$12per m² · approx.
Eggshell Wall Paint 3.0
Interior · CR-FG708 Eggshell Wall Paint 3.0

A dense, silky paint: washes clean without marks, holds its colour and suits damp rooms.

$7per m² · approx.
Air-purifying
Velvet Wall Paint
Interior · YS707 Velvet Wall Paint

Pearl powder, bentonite and cotton. A velvet sheen that shifts with the light, plus negative-ion release.

$15per m² · approx.