Epoxy colored sand self-leveling

This image is our visualisation: it shows the material and the shade, not a photographed project.

Floor coatings · C03

Epoxy colored sand self-leveling

Model CR-EP

Waterborne epoxy floor: thinned with clean water, can be laid on a damp substrate, close to odourless.

$37per m² · approximate*
System make-up, price per m²
  • Waterborne epoxy primer$2
  • Water-based epoxy self-leveling colored sand$35
  • System per m²$37

* The price per m² is approximate: every material is calculated for the project, depending on the surface it goes onto (paint, cement and so on).

For 10 m²: $370
Where it is usedGeneral-purpose floors, and in particular hospitals, pharmaceutical and food production, supermarkets, dairy and cosmetics plants — anywhere the floor has to stay clean, the substrate may be damp and odour during application must be kept to a minimum.
  • Low VOC, waterborne, odourless and environmentally sound
  • High adhesion and short curing time
  • High hardness and strength, excellent wear resistance
  • One-way vapour permeability — no blistering or bubbling

A floor epoxy in which water takes the place of the solvent. It is built from waterborne epoxy resin, a waterborne hardener, functional pigments, fillers and additives. Physical and chemical resistance is high, and the vapour-blocking problem of solvent-based epoxy floors is resolved, which gives a longer service life and better protection of the slab — a sound choice among current floor systems.

BrandVISSNEY
Item code / modelCR-EP
SeriesFloor coatings
Pack sizeto be confirmed
Coverageto be confirmed
ApplicationFloors, Wet areas
EffectSmooth
PropertiesOdourless, Washable, Moisture-resistant
ManufacturerFoshan Shunde Chaoran Building Materials Industry Co., Ltd.

System layers

LayerCoatsPrice per m²
Waterborne epoxy primer1$2
Water-based epoxy self-leveling colored sand1$35
Total per m²$37

Application steps

  1. Apply primer to the levelled substrate
  2. Apply the intermediate coat in two passes
  3. Trowel on the main material in two passes
  4. Apply the topcoat

Sequence taken from the manufacturer's technical data sheet. Level, dust off and dry the substrate before you start.

All terms

The properties and figures on this page come from the VISSNEY catalogue and are stated by the manufacturer; we have not tested them ourselves.

Similar materials

Full series
Waterproofing
Rooftop waterproof paint
Nano · CR-X3 Rooftop waterproof paint

Exposed waterproofing that can be walked on. Fibre-reinforced, giving the effect of a built-in fleece layer.

$12per m² · approx.
Eggshell Wall Paint 3.0
Interior · CR-FG708 Eggshell Wall Paint 3.0

A dense, silky paint: washes clean without marks, holds its colour and suits damp rooms.

$7per m² · approx.
Microcement Paint for wall
Interior · CR-613 Microcement Paint for wall

Silicate cement with mineral pigments: a seamless, non-combustible coating for bathrooms and pools.

$14per m² · approx.