Waterborne epoxy floor: thinned with clean water, can be laid on a damp substrate, close to odourless.
This image is our visualisation: it shows the material and the shade, not a photographed project; the squares in the shade picker are real factory samples.
Coloured stone: fired sand and mineral aggregate bound with adhesive, trowelled back to a natural stone look.
* The price per m² is approximate: every material is calculated for the project, depending on the surface it goes onto (paint, cement and so on).
Mineral Sand Paint is a trowel-applied method: fired sand and mineral aggregate are mixed with a dedicated adhesive in a set proportion, laid onto the substrate, levelled and worked with a trowel until the natural character of the stone comes through. The raw material comes in different colours and grain shapes, each with its own texture, sheen and depth of colour, which is why the finish is used both in interiors and in external landscaping, where it reads as natural and understated. Designers in China and abroad value Mineral Sand for exactly this expressive quality.
| Brand | VISSNEY |
| Item code / model | CR-MS |
| Series | Floor coatings |
| Pack size | 20 kg per bucket |
| Coverage | around 4 kg/m² |
| Drying time | about 4 hours |
| Application | Floors, Facade |
| Effect | Stone / granite, Textured |
| Properties | Moisture-resistant, UV-resistant |
| Shades in palette | 4 |
| Manufacturer | Foshan Shunde Chaoran Building Materials Industry Co., Ltd. |
| Layer | Coats | Price per m² |
| Primer | 1 | $2 |
| Mineral Sand Paint (Mineral Multicoloured) | 1 | $51 |
| Topcoat | 2 | $9 |
| Total per m² | $62 |
Sequence taken from the manufacturer's technical data sheet. Level, dust off and dry the substrate before you start.
Come to the showroom and see the shades in person — on screen the colour is only approximate. Any colour can be made to order, except for ranges that come in factory shades only.
The properties and figures on this page come from the VISSNEY catalogue and are stated by the manufacturer; we have not tested them ourselves.
Waterborne epoxy floor: thinned with clean water, can be laid on a damp substrate, close to odourless.
Silicone-acrylic emulsion with kiln-fired sand: a European look, trowel-applied with no spraying.
Endlessly variable three-dimensional relief: by trowel or spray gun, indoors and out.
Exposed waterproofing that can be walked on. Fibre-reinforced, giving the effect of a built-in fleece layer.