Rooftop waterproof paint

This image is our visualisation: it shows the material and the shade, not a photographed project.

Nano waterproofing · E02

Rooftop waterproof paint

Model CR-X3 20 kg pack

Exposed waterproofing that can be walked on. Fibre-reinforced, giving the effect of a built-in fleece layer.

ShadePMS663 Full palette
$12per m² · approximate*
System make-up, price per m²
  • Special sealer (primer)$2
  • Rooftop waterproof paint$10
  • System per m²$12

* The price per m² is approximate: every material is calculated for the project, depending on the surface it goes onto (paint, cement and so on).

For 10 m²: $120
Where it is usedRoofs, bathrooms, and interior finishing and wall protection in villas, hotels, hospitals, schools, office buildings and homes.
  • Waterborne: non-toxic, no strong odour, non-flammable.
  • Excellent adhesion, flexibility, elasticity, crack and weather resistance, and UV resistance.
  • Fibre in the formulation works as an additional fleece layer — better waterproofing and resistance to vibration.
  • The dedicated waterborne formulation gives protection against mould, bacteria and soiling.

Bonds strongly to cement, filler, ceramic tile, metal, timber, glass, plastic and other substrates. Water resistance, extensibility, crack-bridging and hardness are high, and the film withstands prolonged immersion, puncture and washing. It addresses water seeping through external walls, damp carried through walls and mould. It can be applied directly when refurbishing bathroom walls and floors.

BrandVISSNEY
Item code / modelCR-X3
SeriesNano waterproofing
Pack size20 kg per bucket
Coveragearound 0.25 kg/m²
Coat thickness1 mm per coat
Drying timeabout 4 hours
ApplicationRoofs and balconies, Wet areas, Facade, Floors
EffectSmooth
PropertiesWaterproofing, Moisture-resistant, Mould-resistant, UV-resistant, Washable
Shades in palette8
ManufacturerFoshan Shunde Chaoran Building Materials Industry Co., Ltd.

System layers

LayerCoatsPrice per m²
Special sealer (primer)—$2
Rooftop waterproof paint—$10
Total per m²$12

Application steps

  1. Apply primer in two coats to the levelled substrate
  2. Apply the main material in two coats

Sequence taken from the manufacturer's technical data sheet. Level, dust off and dry the substrate before you start.

PMS663#DEE1E6
PMS664#CCD3E5
PMS665#B4BFDF
PMS666#91A0CB
PMS290#A9CEE8
PMS291#89BAE1
PMS292#4A8ACE
PMS293#004FB6

Come to the showroom and see the shades in person — on screen the colour is only approximate. Any colour can be made to order, except for ranges that come in factory shades only.

All terms

The properties and figures on this page come from the VISSNEY catalogue and are stated by the manufacturer; we have not tested them ourselves.

Similar materials

Full series
Epoxy colored sand self-leveling
Floors · CR-EP Epoxy colored sand self-leveling

Waterborne epoxy floor: thinned with clean water, can be laid on a damp substrate, close to odourless.

$37per m² · approx.
Eggshell Wall Paint 3.0
Interior · CR-FG708 Eggshell Wall Paint 3.0

A dense, silky paint: washes clean without marks, holds its colour and suits damp rooms.

$7per m² · approx.