Waterproof And Heat Insulation Integration Coating

This image is our visualisation: it shows the material and the shade, not a photographed project.

Functional coatings · D03

Waterproof And Heat Insulation Integration Coating

Model CR-HI 20 kg pack

Reflects over 95% of solar energy: surface 15–25 °C cooler, energy savings up to 58%.

$10per m² · approximate*
System make-up, price per m²
  • Special sealer (primer)$2
  • Thermal insulation and waterproof integrated coating$8
  • System per m²$10

* The price per m² is approximate: every material is calculated for the project, depending on the surface it goes onto (paint, cement and so on).

For 10 m²: $100
Where it is usedMetal substrates (profiled sheet, metal enclosures, base stations, chemical tanks), concrete roofs and facades, and other solid substrates.
  • Good insulation and cooling: after prolonged heating the surface does not become hot, with a temperature drop of over 15 °C and energy savings above 58%.
  • A tough water-resistant film that effectively prevents leaks and seepage.
  • UV resistance and excellent weathering, with an effective service life of over 10 years.
  • Resistant to acids, alkalis and rain; stands up to severe weather.

A radiation-reflective composite insulating material with high reflectivity and low thermal conductivity. A vacuum-deposited layer reflects more than 95% of solar energy, bringing the surface temperature down by 15–25 °C. Service life is 10 years. It insulates, cuts the energy drawn by cooling, improves working conditions through the hot season and waterproofs the surface at the same time.

BrandVISSNEY
Item code / modelCR-HI
SeriesFunctional coatings
Pack size20 kg per bucket
Coveragearound 4.5 kg/m²
Drying timedust-dry in 45 minutes, fully dry in 24 hours
ApplicationRoofs and balconies, Facade
EffectSmooth
PropertiesHeat-reflective, Waterproofing, Moisture-resistant, UV-resistant, Washable
ManufacturerFoshan Shunde Chaoran Building Materials Industry Co., Ltd.

System layers

LayerCoatsPrice per m²
Special sealer (primer)—$2
Thermal insulation and waterproof integrated coating—$8
Total per m²$10

Application steps

  1. Apply the first coat of the main material by roller or spray gun (dries in about 45 minutes)
  2. Apply the second coat of the main material (the first coat must be fully dry)

Sequence taken from the manufacturer's technical data sheet. Level, dust off and dry the substrate before you start.

All terms

The properties and figures on this page come from the VISSNEY catalogue and are stated by the manufacturer; we have not tested them ourselves.

Similar materials

Full series
Waterproofing
Rooftop waterproof paint
Nano · CR-X3 Rooftop waterproof paint

Exposed waterproofing that can be walked on. Fibre-reinforced, giving the effect of a built-in fleece layer.

$12per m² · approx.
Nalan Starry Glitter Paint
Interior · CR-NL707 Nalan Starry Glitter Paint

An eco-friendly art coating with coloured flecks and a soft suede sheen. Spray-applied.

$12per m² · approx.
Eggshell Wall Paint 3.0
Interior · CR-FG708 Eggshell Wall Paint 3.0

A dense, silky paint: washes clean without marks, holds its colour and suits damp rooms.

$7per m² · approx.